500 CLEAR WICK STICKERS, BEST STICKING WICK STICKERS AVAILABLE

Note: remember to clean the bottom of your jar with a light rub of windex before placing your wick stickems. Taking wick stickers to a new level. Made from micro thin marine fiber. These are not availble anywhere else. ultra thin profile makes these perfect for wood wicks or any candle that need the wick tab to not show. We find these to hold better than ordinary wick stickers. These are not glue dots. We find the foam material on typical wick stickers can come lose over time and we prefer these to our starndard wick tabs. We also find the metal restrainers on wood wicks hold better with these tabs and look much better. These are the only wick stickers we use when testing our candles. The correct way to apply a wick sticker is to first clean the bottom of your jar with rubbing alcohol, then apply the wick sticker. Once you apply the wick firmly push the wick assembly onto the wick sticker. We like using a metal straw. Wick stickers will work much better than hot glue. Hot glue can come lose if your customer burns the candle down (and we know most customers do this) note : if you pour your wax too hot it can cause the wick sticker to come lose. Make sure you are using an old fashioned candy thermometer to take your wax temperature. Using an Infrared thermometer is only giving you the temperature on the top of your wax. Palm waxes are poured at a higher temperature so pay attention when using these. RTV gasket sealer is another adhesive some candle makers use. We do not recommend this because of the cure time and many customers like to reuse their vessels and this sealant will not come lose from the vessel. We consider it overkill but it will hold your wicks firmly.